Set of 4 holders, numbered from 1 to 4
Standard 5gr Holder. Easy to apply thanks to a 3M double-side tape pre-installed. You can put it on your main chassis or in your front bumper. The most usefull thing is that you can remove the 5gr easly, just with your finger or with the help of a screw driver, test on track, and if the modification is not good for your driving you can easy connect the 5gr again. No more double-side tape to remove and clean, no more weights to put in the rubbish. Easy to install and weight is less than 1 gr. In the package two 5gr holder and tw 5gr weight.
Standard 5gr Holder. Easy to apply thanks to a 3M double-side tape pre-installed. You can put it on your main chassis or in your front bumper. The most usefull thing is that you can remove the 5gr easly, just with your finger or with the help of a screw driver, test on track, and if the modification is not good for your driving you can easy connect the 5gr again. No more double-side tape to remove and clean, no more weights to put in the rubbish. Easy to install and weight is less than 1 gr. In the package two 5gr holder. 5gr weight is not in the package.
28 Boxes, each box is 2,3 x 2,0 cmBox is 11x17,5x2,5 cm
The transponder AMB RC4 PRO support is suitable for all model of Capricorn C804 and it fix also the steering servo. Made with 3d print with high strenght plastic.
PRC body stiffeners kit for all Xtreme Aerodynamics 1/8 on-road bodies, suitable for version Diablo, Super Diablo and Hyper Diablo. The stiffeners kit is made by 8 body side stiffeners, fixed at the body with M2,5 screws (included in the kit).The positioning is easy and simple thanks to the original Matrix stiffeners link place. The total weight of the kit is the same as original stiffeners made by lexan, but it’s more resistance and easy to remove, especially when you need to save space in luggage with bodies. The stiffeners are made by black hard plastic, this garantee a very strong side support.
PRC body stiffeners kit for PIP-AERO 1/8 on-road bodies. The stiffeners kit is made by 8 body side stiffeners, fixed at the body with M2,5 screws (included in the kit).The positioning is easy and simple. The total weight of the kit is the same as original stiffeners made by lexan, but it’s more resistance and easy to remove, especially when you need to save space in luggage with bodies. The stiffeners are made by black hard plastic, this garantee a very strong side support.
Size: Front 67,5mm / Rear 74,5mmRubber cover, made by strong and durable TPU, for front and rear CVD driveshaft of all 1/8 on-road cars. This rubber cover, extra light weight, maintain the CVD grease inside the CVD caps. The result is a longer life for CVD pins, more lubrification in rotation parts and car more clean in the CVD area. The package is made by 2 covers, suitable for both front and rear axles of every car brand.
Rubber cover, made by strong and durable TPU, for front and rear CVD driveshaft of all 1/8 on-road cars. This rubber cover, extra light weight, maintain the CVD grease inside the CVD caps. The result is a longer life for CVD pins, more lubrification in rotation parts and car more clean in the CVD area. The package is made by 2 covers, suitable for both front and rear axles of every car brand.
In the package 1 sponge air filter
High performance lubricating grease ideal for the lubrication of thrust bearings, green in colour, with high lubrication characteristics at high temperatures and high rotation speeds. Very high adhesion thanks to a stringy consistency. Waterproof. As the temperature increases, its characteristics change and its density becomes lower, thus giving the lubricated components greater smoothness.
CVD GREASE: Very high performance mineral-based lubricating grease, suitable for lubricating and making constant velocity joints and any other mechanism subject to heat and friction slide. It has a very high degree of adhesiveness and therefore resists very high values of centrifugal force. Easily applicable thanks to the specially designed pen/syringe dispenser. Resistant up to +650°C. Silicone-free and water resistant. It therefore guarantees persistence in your CVDs for a very long period. CLUTCH GREASE: High performance lubricating grease ideal for the lubrication of thrust bearings, green in colour, with high lubrication characteristics at high temperatures and high rotation speeds. Very high adhesion thanks to a stringy consistency. Waterproof. As the temperature increases, its characteristics change and its density becomes lower, thus giving the lubricated components greater smoothness.
After Sundays of testing, here is new PRC Air Filter Oil. Combined with PRC-A025 InsBox Efra 202301, offers to your engine the best performance and breath ever. It's suggested for On Road use only and need just few drops to guarantee the best result.
Very high performance mineral-based lubricating grease, suitable for lubricating and making constant velocity joints and any other mechanism subject to heat and friction slide. It has a very high degree of adhesiveness and therefore resists very high values of centrifugal force. Easily applicable thanks to the specially designed pen/syringe dispenser. Resistant up to +650°C. Silicone-free and water resistant. It therefore guarantees persistence in your CVDs for a very long period.
Suitable with Hudy 1/8 set up system. Measure till 38 degress.
NEW PRC INS-BOX SET for 1/8 and 1/10 on road scale. EFRA APPROVED with number of homologation INS202301 Super light weight (-20%), 8mm lower and 3mm diameter less than other ins-boxes. The INS-BOX is made of light weight ABS, color black. The sponge is low profile to reduce the total height of the ins-box. The air inlet is made by x2 8mm holes and then air pass through the "turbo effect" and goes into the carburetor with more speed and more pressure. This increase of air pressure makes the top speed rising of 2km/h, more constant carburetion and more torque. All combined with new aero design, especially designed for new 1/8 on road bodies.