MYE0008A-01 is needed to complete the Floating Steering Servo Build

Front universal driveshaft 96mm longFront short universal, like the 99mm but shorter length! Use it with the longer outdrives MYB0119-01The front universal will provide more initial steering but be more aggressive. To use the front universal, you will need the updated front knuckles:Left KPI0.5 - MYB0042B-01Right KPI0.5 - MYB0043B-01Left KPI1 - MYB0042BRight KPI1 - MYB0043B You will also need 1x 2mm shim (MYB0048) between the bearings. You must remove the red bearing spacer which comes with the knuckle and is used for the CVD.

New stronger version of the aluminium steering posts for Mayako MX8

New stronger version of the aluminium steering posts for Mayako MX8

MYE0008A-02 is needed to complete

If you use the MYB0113-43 Ring gear you need to use MYB0112-13 13t Pinion gear for Mayako MX8

MYE0008A-02 is needed to complete

Hardware Included:2pcs M3x20mm Counter Sunk Screws1pcs M4x8mm Counter Sunk Screw (For 0-1mm Height Shims)1pcs M4x10mm Counter Sunk Screw (For 2-3mm Height Shims)4pcs 3x5x1mm Shims3pcs 4x7x1mm Shims  Needed to complete:MYB0050-03MYB0048-03Optional parts for adjustable offset:MYB0036-01 - Adjustable Length Rear Arms with Plastic Inserts

The body of the new 3-piece rear hub, you will also need MYB0182, MYB0183, MYB0048-03, MYB0050-03, MYH0050. Or you buy the complete rear hub set MYB0180 (sold as 1 piece).

The link mount of the new 3-piece rear hub, you will also need MYB0181, MYB0183, MYB0048-03, MYB0050-03, MYH0050. Or you buy the complete rear hub set MYB0180 (sold as 1 piece).

Mayako - 3-Piece CNC Rear Hub Mounting Bracket for Mayako MX8

 Aluminium upper steering plate to use with the upper arms for Mayako MX8

Red shim to adjust the link hegiht on the new 3-piece rear hub.

MXP High Performance Bearings to use with MYB0112-13 13t Pinion gear or MYB0112-14 14t Pinion gear for Mayako MX8

New rear suspension arm with adjustable arm length. You need the new 3-piece rear hub (MYB0180) in case you want to use middle or shortest arm option

Plastic bearing bushings to adjust axle height in the new 3-piece rear hub (MYB0180).

Plastic inserts for the new 3-piece rear hub to be able to run the different lengthes of the new rear suspension arm (MYB0036-01).

Rear short universal, like the 94mm but shorter length! Use it with the longer outdrives MYB0119-01

Front universal driveshafts 99mm long. 2pcs The front universal will provide more initial steering but be more aggressive. To use the front universal, you will need the updated front knuckles:Left KPI0.5 - MYB0042B-01Right KPI0.5 - MYB0043B-01Left KPI1 - MYB0042BRight KPI1 - MYB0043B You will also need 1x 2mm shim (MYB0048) between the bearings. You must remove the red bearing spacer which comes with the knuckle and is used for the CVD.

Mayako - Long Differential Outdrives (Front-Rear) for Mayako MX8 (2 pcs)Long outdrives to fit shorter driveshafts:

Aluminium diff cross pins that will save you weight in your drive train

Mayako - Wheel Hex 4mm for Mayako MX8 (2 pcs)

Mayako - Carbon Fibre Long Link Rear Shock Tower for Mayako MX8

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24)If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01But beware, the car will become harder to drive too.

Lower D-Block so you can run a lot of anti-squat and with a low arm position. With the height insert in the middle on this block, the D-Block height is the same as lowered 1mm on the stock D-Block.

Rear tower link insert to be able to adjust short or long link on the new aluminium rear tower for the MX8 buggy.

Mayako - Rear Universal Driveshaft Pair 91mm for 8x16x5 bearing, for Mayako MX8 (2 pcs)

The 94mm rear driveshaft we all know but with round hole axle Optional rear universal shaft. You also need to change to the bigger 13X19X4 bearings in the hub. Parts needed to run 94mm rear unversal:MYB0052-01 Rear Universal Driveshaft Pair 94mmMYB0168 13x19x4mm Ball Bearing2x MYB0048 Rear Bearing Crush Washer

 Carbon Fibre Front Shock Tower for upper links for Mayako MX8

Mayako - D-Block (Screw Type Inner Hinge Pin), use with MYB0029A for 3deg (54.5), for Mayako MX8

Mayako - D-Block (Screw Type Inner Hinge Pin), use with MYB0029-02A for 0.5deg (52), for Mayako MX8

Carbon fibre upper steering plate for upper links for Mayako MX8 3.7g saved over MYB0017

D-Block (Screw Type Inner Hinge Pin), use with MYB0029-01A for 1.5deg (53), for Mayako MX8

Mayako titanium gearbox screws saves weight compared to standard steel screws

Carbon Fibre steering knuckle plate 2 (Short) for Mayako MX8

Updated tower with the option for adjustable wing height. Shock mounting height raised by 2mm. Inserts (MYB0178) included with tower.Inserts used for link position to allow finer adjustment of link length.

The 2.0 wing and "The Wing of David", developed in the first few months as Mr. DR joined Mayako. The wing is slightly wider than the "1.0" wing.

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

C-Block Wide 54mm, use with MYB0030-03A for 1.5deg, for Mayako MX8 (-24)If you want to get more rear support and more rotation off power use these wide blocks. You must use with the adjustable rear arms MYB0036-01But beware, the car will become harder to drive too

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, rear arm posts MYB0159, rear arm brace MYB0158, pills MYB0031-02, turnbuckle MYB0162 to

Rear tunrbuckle for upper arm conifiguration.

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, hinge pins MYB0163R, rear arm brace MYB0158, pills MYB0031-02, turnbuckle MYB0162 to

Used with the upper arm rear end setup, note that you also need following items to complete the rear end with upper arm setup: tower MYB0155, arms MYB0160, rear arm posts MYB0159, hinge pins MYB0163R, pills MYB0031-02, turnbuckle MYB0162 to

Body 2.0 without sidewings, LW as well 0.8mm for Mayako MX8

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

Coloured option of the Mayako "1.0" wing which is a little more narrow than the "2.0" version MYB0152-01-BLK

The 2.0 wing and "The Wing of David", developed in the first few months as Mr. DR joined Mayako. The wing is slightly wider than the "1.0" wing.

Carbon fiber plate for the first generation aluminium rear hubs, with this you can achieve the shortest settings for the rear camber link. For longer settings you need to get the MYB0051CF-01A.

Carbon fiber plate for the first generation aluminium rear hubs, with this you can achieve the longest settings for the rear camber link. For short settings you need to get the MYB0051CF-02A 

Inserts to change height and toe in for MYB0050-01 aluminium rear hub for Mayako MX8

Aluminium left or right rear hub for Mayako MX8For a pair of rear hubs you need:2x MYB0050-011x MYB0048-021x MYB0050-02Plus one of the below (option for long or short link):1x MYB0051CF-01A - Long link (stock length)1x MYB0051CF-02A - Short link

Rear Arm Carbon Braces used with MYB0036 Rear arms for Mayako MX8

Mayako - C-Block (Screw Type Inner Hinge Pin), use with MYB0030A for 3deg (48.5), for Mayako MX8

Mayako - C-Block 51mm (Screw Type Inner Hinge Pin), use with MYB0030-02A for 0.5deg, for Mayako MX8

Mayako - C-Block 50mm (Screw Type Inner Hinge Pin), use with MYB0030-01A for 1.5deg, for Mayako MX8C-Block 50mm for Mayako MX8 for Screw Type Inner Hinge Pin. These blocks are stock on -23 and newer models. They work on older models also, but you need to replace both blocks and use the screw type hinge pins.

Updated tower with the option for adjustable wing height. Shock mounting height raised by 2mm. Inserts (MYB0178) included with tower.Inserts used for link position to allow finer adjustment of link length.

Mayako - Plastic Sideguards (Green) for Mayako MX8 (2 pcs)

Mayako - Plastic Sideguards (Yellow) for Mayako MX8 (2 pcs)

Mayako - Plastic Sideguards for (Orange) Mayako MX8 (2 pcs)

Aluminium steering servo arm 25t for Mayako MX8

Aluminium steering servo arm 23t for Mayako MX8

Carbon Fibre Rear Shock Tower for upper arms for Mayako MX8

Rear Shock Spring Grey 80mm 10.75 for Mayako MX8

Rear Centre 115mm Universal Driveshaft used with MYB0001-01 Long +4mm rear chassi for Mayako MX8

Rear Centre 111mm Universal Driveshaft used with MYB0001 3mm (Stock) chassi for Mayako MX8

Front centre 78mm universal driveshaft for Mayako MX8

To use this dogbone, you also need MYB0120, Centre Dogbone Outdrive (2pcs) for Mayako MX8.This dogbone is intended for the +4mm length chassis MYB0001-01 for Mayako MX8

5x10x4 MXP High Performance Bearings to use with MYB0082 13t Clutch bell for Mayako MX8 

Light weight 48t centre main gear, 5.5g in weight savings for Mayako MX8

6mm wheel hexes, use these on the new 3-piece rear hub.

Left KPI-0.5 Steering Knuckle for Mayako MX8 (22-24)This knuckle allows you to use front cvd or universal driveshaft

Left C-Hub KPI-1 Caster 2 with camber link insert included for Mayako MX8 (22-24)Remember to order lower KIng PIn for kpi-1, part: MYB0047AFits on:MYB0042B-01MYB0042B To use with old knuckles remove top red height shim.  

Left C-Hub KPI-0.5 Caster 2 with camber link insert included for Mayako MX8 (22-24)You will need to get the lower King pin for this c-hub MYB0047-01Fits on:MYB0042B-01MYB0042B To use with old knuckles remove top red shim height

Left C-Hub KPI-0.5 Caster 1 with camber link insert included for Mayako MX8 (22-24)You will need to get the lower King pin for this c-hub MYB0047-01Fits on:MYB0042B-01MYB0042B To use with old knuckles remove top red shim height.  

Middle and End Carbon Diff Height Insert for MYB0027B1

2pcs per bag - insert used on new steering hubs and knuckles so you will be able to run higher or lower position on camber link just flipping the insert.Insert fits into MYB0039A-02MYB0039A-03MYB0039AMYB0039A-01MYB0040A-02MYB0040A-03MYB0040AMYB0040A-01

Front 54,50mm (Stock) Shock Shafts for Mayako MX8 (-21).New Revision (A) - Updated Threads

Lower King pins for KPI-0.5 C-Hubs 

Right KPI-0.5 Steering Knuckle for Mayako MX8 (22-24)This knuckle allows you to use front cvd or universal driveshaft

Right C-Hub KPI-1 Caster 2 with camber link insert included for Mayako MX8 (22-24)Fits on:MYB0043B-01MYB0043BTo use with old knuckles remove top red shim height. 

Right C-Hub KPI-1 Caster 1 with camber link insert included for Mayako MX8 (22-24)Remember to order lower King Pin for KPI-1, part: MYB0047AFits on:MYB0043B-01MYB0043BTo use with old knuckles remove top red shim height.