Share with original factory E2713New quick change engine mount set for the Mugen MBX8 and MBX7 buggies.The set contains a 1-piece base as well as two engine blocks and the overall design allows to keep the base in the car while detaching the engine by only undoing the blocks/base screws. As the gear mesh is adjusted sliding the engine on the blocks, it can be installed and released without any hassle as the engine/blocks assembly slides right into place without the need for gear mesh adjustments. The assembly is available as a complete set but the base and engine blocks are also available separately and including the needed hardware.

For Mugen MBX8/MBX8T/MBX8R/MBX8TR

For Mugen MBX8/7R/7/MBX8 ECO/Mugen MBX8R

Shock caps are constructed from high quality aluminum with Black Anodized adding strength and durability. The package includes 3 different adjustable shock caps and 3 different seals - honeycomb, round cap, and O-ring, can be assembled. Each combination will have different shock rebound effects, to keep the shock system at its best working condition, thus ensuring the model car is more stable and controllable during operation. 

Note:These T-Work's Shock Shaft Guides are thinner by a total of 0.2mm when compared to the standard kit shock shaft guides, the reason being track tests by our team showed a smoother shock compression and extension when the guides are made thinner by a total of 0.2mm. Install the T-Work's Shock Shaft Guides the same way as the kit shock shaft guides without any modification or additional partsFor Mugen MBX8/7R/7/7GT/ MBX8 ECO/Mugen MBX8R 

For Mugen MBX-6/MBX-7/Sworkz/MBX8/Mugen MBX8 ECO/Mugen MBX8R  

For Mugen MBX-6/MBX-7/Sworkz/MBX8/Mugen MBX8 ECO/Mugen MBX8R  

For Mugen MBX-6/MBX-7/Sworkz/MBX8/Mugen MBX8 ECO/Mugen MBX8R  

For Mugen MBX-7R /MBX 8/MBX8/MBX8R ECO

For Mugen MBX-7R /MBX 8/MBX8/MBX8R ECO

For Mugen MBX8 / MBX7R/ MBX8R

For Mugen MBX8 / MBX7R/ MBX8R

For Mugen MBX8 / MBX7R/Mugen MBX8R

For Mugen MBX8 / MBX7R/Mugen MBX8R

For Mugen MBX8 / MBX7R/Mugen MBX8R

For Mugen MBX8/Mugen MBX8R

For Mugen MBX8/Mugen MBX8R

For Mugen MBX8R/8/7R/7/6/ECO/T

4x 0,5mm & 4x 0,75mm ScheibenFor Mugen MBX7/7R/MGT7/MBX8/Mugen MBX8R

4x 0,5mm & 4x 0,75mm ScheibenFor Mugen MBX7/7R/MGT7/MBX8/Mugen MBX8R

For Mugen MBX8/MBX8R

For Mugen MBX8/MBX8R

For Mugen MBX8/MBX8R

Set kommt wie auf Bild zu sehen.For Mugen MBX8/MBX8R

Set kommt wie auf Bild zu sehen.For Mugen MBX8/MBX8R

For Mugen MBX8/MBX8R

64 Titanium Drive Shaft eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.Features:Lightweight and DurableIncreased acceleration and efficiency

64 Titanium Drive Shaft eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.Features:Lightweight and DurableIncreased acceleration and efficiency

For Mugen MBX8R/8/7R/7

For Mugen MBX8/8T/8ECO/7/7T/7ECO/ MBX8R

For Mugen MBX8/8T/8ECO/7/7T/7ECO/ MBX8R

It is new a set of lower titanium shock mount pins for the Mugen MBX8 buggy. The parts are machined from high-quality 64 Grade titanium and will replace the standard steel parts for items of lower weight and greater corrosion resistance. A machined groove helps with precise droop adjustment. The pins come in sets of four and are direct replacements.For Mugen MBX8

It is made for Mugen’s MBX8 1/8th buggy of aluminium optionals in the form of brake cam levers. Starting with the brake cam levers, the parts are machined from 7075-T6 aluminium and they come hard anodised to protect the surface from wear and tear. The parts help to scrub valuable weight and there come in sets of two

For Mugen MBX8 / MBX8 ECO/Mugen MBX8R

For Mugen MBX8/Mugen MBX8 ECO/Mugen MBX8R

For Mugen MBX8R/B3.1/B3.2/B4.1/B4

For For Mugen MBX8/7R/7/MBX8 ECO/Mugen MBX8R

For Mugen MBX8 /T/ECO/MBX7 /R/T/ECO/MBX8R

It is made for the Mugen MBX8 buggy is a set of spring steel centre diff joints. The outdrives are a direct fit and sport a special surface treatment for wear as well as machined bearing and bevel gear seats for improved precision. The parts are also compatible with the MGT7 and older spec MBX series kits.

For Mugen MBX-6/6T / Mugen MBX8 ECO

For Mugen MBX8/Mugen MBX8R

For Mugen MBX8/Mugen MBX8R

For Mugen MBX8R

For Mugen MBX8R

For Mugen MBX8R

For Mugen MBX8R

For Mugen MBX8R

For Mugen MBX8/MBX8 ECO/Mugen MBX8R

For Mugen MBX8/MBX8R

It is made for the Mugen MBX8 1/8th scale off-road buggy is a carbon fibre upper plate. The part was designed as a replacement for the standard moulded composite item and it includes the needed alloy shims and also a gold-plated steel screw kit. Using the carbon fibre plate will improve the rigidity of the front end of the buggy while adding visual impact at the same time.TO-213-MBX8  Thickness : 2.5mmFor Mugen MBX8/Mugen MBX8 ECO/Mugen MBX8R

The new Ver.2 carbon fibre shock towers for the Mugen MBX8 and MBX8 Eco series of 1/8th off-road buggies. Coming as separate front or rear tower both are cut from high-quality 4mm carbon fibre with the rear tower offering additional mounting positions for the rear wing in order to adjust the overall centre of gravity or downforce

For Mugen MBX8/MBX8R

Graphite Side Guards are carbon fiber options that offer reduced weight and rigidity durability with no change in handling characteristics. Package includes one left and one right side guards with installation hardware.Features:High quality carbon fiber materialPerfect fit and upgrade for the platforms

For Mugen MBX8R/8/7R & Agama A319/A319E

- Schwarz, hart kodiert- Light weight

- Schwarz, hart kodiert- Light weight- +1mm wide offset wheel hub

- Schwarz, hart kodiert- Light weight- +2mm wide offset wheel hub

This product is compatible with the original number:#E2173Arm Mount Insert is made of Derlin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

This product is compatible with the original number:#E2173Arm Mount Insert is made of Derlin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

This product is compatible with the original number:#E2173Arm Mount Insert is made of Delrin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

This product is compatible with the original number:#E2173Arm Mount Insert is made of Delrin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

For Mugen MBX7/7R/MBX8/Mugen MBX8 ECO/Mugen MBX8R

This product is compatible with the original number:#E2173Arm Mount Insert is made of Delrin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

A range of aluminium shock standoffs for the Mugen MBX8 and MBX7 kits. Available l as 2-piece +5mm set, the standoffs are machined from high-quality 7075-T6 aluminium and they come hard anodised for wear and looks. Includes with the shock mounts also come suitable screws. For Mugen MBX7/7R/MBX8/Mugen MBX8 ECO/Mugen MBX8R

A range of aluminium shock standoffs for the Mugen MBX8 and MBX7 kits. Available as 4-piece. The standoffs are machined from high-quality 7075-T6 aluminium and they come hard anodised for wear and looks. Includes with the shock mounts also come suitable screws.

This product is compatible with the original number:#E2173Arm Mount Insert is made of Delrin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

This product is compatible with the original number:#E2173Arm Mount Insert is made of Delrin material through CNC machined, is harder and more durable than the original adjust Insert.Various tilt position adjust Insert are available, you can choose the appropriate adjust Insert according to the tilt position you need to adjust.

 18-piece hard-coated aluminium suspension ball set for the Mugen MBX8 buggy. The set contains pivot balls such as the 7mm hex socket and 7mm standard balls, 6mm hex socket and 6mm anti-roll bar balls beside many other to fully outfit the vehicle with lighter parts compared to the standard steel balls. All are made from high-quality 7075 alloy and they come hard-coated for wear. All ball types are also available separately in 2-piece sets

For Mugen MBX-7/7R/7GT/MBX 8

For Mugen MBX-7/7R/7GT/MBX 8 /Mugen MBX8 ECO/Mugen MBX8R

For Mugen MBX-7/7R/7GT/MBX8 ECO/MBX8R

For Mugen MBX-7/7R/7GT/MBX8 ECO/MBX8R

For Mugen MBX-7/7R/7GT/MBX8 ECO/MBX8R

For  Mugen MBX-7/7R/7GT/MBX 8/MBX8 ECO/MBX8R

For Team Associated RC8 B3/B3.2/T3.2/T3.2E/Mugen MBX8R

For Team Associated RC8 B3/B3.2/T3.2/T3.2E/Mugen MBX8R

Front Upper Arm Mount is made of 7075-T6 lightweight aluminum alloy ,can optimize the suspension system's movement characteristics and maintain stability and flexibility.

( For Mugen MBX8/7R/7/Mugen MBX8R* This product is made of 7075 aluminium .* Adjustable Wing Cushion/Washer* Suitable for Mugen MBX8/7R/7 only* Section A can adjust the wing to the middle* Section B is the offset hole position, which allows the wing to be moved forward or backward.* It can be used independently by wing washer or by adding other types of wing washer.

( For Mugen MBX8/7R/7/Mugen MBX8R* This product is made of 7075 aluminium .* Adjustable Wing Cushion/Washer* Suitable for Mugen MBX8/7R/7 only* Section A can adjust the wing to the middle* Section B is the offset hole position, which allows the wing to be moved forward or backward.* It can be used independently by wing washer or by adding other types of wing washer.

Passend für Mugen MBX8 / MBX8ECO / MBX8R.Die Platten werden unter das Chassis geschraubt und verhindern, dass das Chassis beim Aufsetzen durch Abrieb beschädigt wird.Natürlich unterliegen die Platten dadurch einem gewissen Verschleiß.Der Verschleiß der Platten ist wesentlich geringer als der Verschleiß des Chassis.

Passend für Mugen MBX8R.Die Platten werden unter das Chassis geschraubt und verhindern, dass das Chassis beim Aufsetzen durch Abrieb beschädigt wird.Natürlich unterliegen die Platten einem gewissen Verschleiß.Der Verschleiß der Platten ist wesentlich geringer als der Verschleiß des Chassis.

For Mugen MBX8/7R/7/Mugen MBX8R)